Multi-Cylinder Hydraulic Cone Crusher

Multi-Cylinder Hydraulic Cone Crusher

Product Description

Company Info

Product Description

PYG series cone crusher, combining the technology of single-cylinder cone crusher and PYF cone crusher, is the new type of cone crusher by adopting the advanced and optimized idea of design. Owing to the use of better crushing frequency and eccentric distance, the content of fine graininess is much higher and the content of the granularity less than the discharge opening on closing edge may reach 80%, As a result, the processing capacity of following operating procedures is highly improved and the comprehensive energy consumption is lowered.

The combining of high performance crushing cavity type and high crushing frequency improve its processing capacity greatly. In addition, it adopts laminated principle so that most of the crushing products are cubic structure, which reduces needle and flake materials to utmost extent.
It adopts complete hydraulic operation, which is convenient to use and easy to realize automation, so that its reliability and service life are improved greatly.

Simple structure is convenient to operate and maintain. The adjustment of discharging opening is convenient and fast so that time and labor are saved when examine. Especially, liner plate is easy to be replaced quickly, which reduces the stopping time.
It has the features of reliable performance and convenient operation.
Because of adopting optimized design and hydraulic protection, fault rate is lowered greatly. In normal operation condition, its non-fault rate will exceed 85%.

Principal technical data:

Notes:
1. The processing capacity indicated in the table depends on the factors of feed size, crushing cavity type, material density, material cleanliness, and water content etc.
2. This minimum discharging opening is the minimum discharging opening which is realized without leading bearing to jump, which is related to materials. This discharging opening is changeable.
3. The parameter of processing capacity is gained under the condition of open flow, compressive strength 1400 Mpa-150 Mpa, water no more than 4%, even feed, large and small material size no more than 10% and motor load in 85%-90% of full load.
4. In models there are four numbers. The front two refers to 1/100 of crushing cone diameter and the back two refers to 1/10 of discharging opening size on open edge.
5. The data is subject to change without further notice.
Type Model Chamber Type Diameter of Large End of Crushing Cone(mm) Adjustable Range of Discharge Opening  (mm) Feed Opening Size of the Open edge when Recommending the Min Discharge Opening Max Feed Size Producing Capacity (t/h) Main Motor Power (kw) Weight (kg) Overall Dimension (L×W×H) (mm)
                     
φ900 PYGB-0913 Standard fine type 950 14-38 130 110 130-250 160 17000 2007×2225×1950
PYGB-0916 Standard medium type 18-38 155 132 145-250
PYGB-0921 Standard coarse type 22-38 210 178 155-250
PYGD-0907 Short coarse type 8-25 70 60 80-220
PYGD-0909 Short head medium type 10-25 90 76 90-220
PYGD-0912 Short head coarse type 12-25 118 100 120-220
φ1100 PYGB-1114 Standard fine type 1100 16-45 135 115 180-445 220 18500 2520×2620×2400
PYGB-1121 Standard medium type 20-45 211 180 200-445
PYGB-1124 Standard coarse type 26-45 235 200 230-445
PYGD-1107 Short coarse type 8-25 70 60 120-220
PYGD-1110 Short head medium type 12-25 96 82 120-220
PYGD-1112 Short head coarse type 14-25 124 105 120-220
φ1400 PYGB-1415 Standard fine type 1400 16-50 152 130 225-620 315 29700 3106×3170×2945
PYGB-1420 Standard medium type 22-50 200 170 270-620
PYGB-1433 Standard coarse type 26-50 330 280 300-620
PYGD-1408 Short coarse type 8-25 80 68 115-370
PYGD-1411 Short head medium type 10-25 106 90 140-370
PYGD-1414 Short head coarse type 12-25 135 115 180-370
φ1500 PYGB-1518 Standard fine type 1500 19-50 180 152 320-725 400 38800 3405×3480×3196
PYGB-1522 Standard medium type 25-50 223 190 365-725
PYGB-1534 Standard coarse type 32-50 335 285 405-725
PYGD-1509 Short coarse type 8-25 88 75 135-455
PYGD-1512 Short head medium type 10-25 124 105 175-455
PYGD-1515 Short head coarse type 13-25 152 130 225-455
                                 
Address: Room 1701, No 2, Lane 585, Bansongyuan Rd., Huangpu Area, Shanghai, China
Business Type: Manufacturer/Factory, Trading Company
Business Range: Manufacturing & Processing Machinery
Company Introduction: Shanghai Xionghou Machinery Manufacturing Co., Ltd. is a manufacturer engage not only food processing machine but also various type of crusher.

We have engaged the crusher business for more than 20 years, we are stable supplier for food machine and crusher.

The XH series of food machine including: Jelly candy machine, hard candy machine, soft milk candy machine, central-filling candy production line, toffee candy machine etc. The above series candy machine are very popular in many countries all over the world, so bread machine and biscuit machine as well.

Considering about the crusher series, we produce all kinds of crusher, including cone crusher, impactor crusher, hammer crusher, roller crusher etc. With high quality, reasonable price and famous brand of SanBao have won good reputation in domestic and overseas market.

Our product are authenticated by IS9001: 2000 and EuropeCE, our factory is authenticated by SGS.

We sincerely welcome customers from all over the world to cooperate with us. And our business rule: The customer is the god, the quality of product is life of enterprise.
Once receive your question, the supplier will answer you as soon as possible.

Send your message to this supplier

Ms. Lily

Post a Sourcing Request Now